CMP
ETS Cable Components are the leading distributors of CMP Products quality cable glands.
Whether commercial/industrial, hazardous area, marine or contaminated areas, CMP Products have a full range of cable glands to suit all cable types.
We believe our products are the safest on the market and are designed to minimise installer error.
One of the areas for concern with all cable glands is the quality of the material from which they are manufactured. In order to guarantee reliability and longevity of operation, CMP Products exclusively source raw materials from reputable European manufacturers. The brass used conforms strictly to European Standard EN12168, specification CW614N and commonly referred to as “high grade marine brass”. The quality of our products is demonstrated by the myriad of third-party approvals which have been granted: Click here
ETS offer a wide variety of CMP Products cable glands from stock with both PVC shrouds, or LSF kits with genuine LSFZeroHalogen sealing rings and shrouds which have third party accreditation from London Underground Limited, report C3132.
|
CMP BW Brass Glands Manufactured in brass for use with all SWA (steel wire armoured) cables in dry industrial applications. Provides mechanical cable retention and electrical continuity via armour wire termination. Available from stock with PVC or LSFZeroHalogen shrouds. |
 |
|
CW Brass Glands Brass cable gland for use with all SWA (steel wire armoured) cables indoor or within protected outdoor environments. The CW variant we stock is supplied with a separate armour locking ring which enables the gland body to be removed without disturbing the armour wire termination. Additionally, all LSFZeroHalogen glands kits feature 15mm male thread length throughout the range. Available from stock with PVC or LSFZeroHalogen shrouds. |
 |
|
E1W Brass Glands Weatherproof brass cable gland for use with all SWA (steel wire armoured) cables, for use within exposed outdoor environments. ETS E1W kits also feature a separate armour locking ring which enables the gland body to be removed without disturbing the armour wire termination, 15mm male thread length throughout the range and nylon thread washers to preserve the IP66 integrity. Available from stock with PVC or LSFZeroHalogen shrouds. |
 |
|
A2 Brass Stuffing Glands For use with unarmoured cables indoor or within protected outdoor environments, all ETS A2 glands feature brass locknuts throughout the range to enable use with single-core power cables. Available from stock with PVC or LSFZeroHalogen shrouds. |
 |
|
CW & E1W Aluminium Glands Aluminium CW and E1W glands for use with AWA (aluminium wire armoured) single-core power cables, available from stock with PVC or LSFZeroHalogen shrouds. |
 |
|
CWCIEL Glands CIEL glands feature a heavy duty cast integral earth lug, suitable instances where a larger level of short-circuit protection is required, e.g. Medium Voltage applications. Available from stock in brass CWCIEL or aluminium CWCIEL ALM, variants are also available for BWL and E1W gland types. Please contact our Sales Team for further details. |
 |
|
Zen Glands Available in both brass and aluminium variants, Zen glands permit the zoning of earth connections for earthed neutral systems. Extensively used throughout the power generation sector, Zen glands feature an insulated bush at the equipment entry and outer IP66 sealing ring. Click here for details of this range. |
 |
|
CMP cable glands are recognised the world-over as leaders in the field of Hazardous Area cable termination. With third-party certification from ATEX, IEC Ex, GOST R, GOST K, ABS/DNV and NEPSI, you are assured the product we supply will provide decades of trouble-free operation. |
 |